Tunze Multicontroller 7096 Mode D'emploi page 69

Short description of the display
„Wavecontroller socket 3 & 4" field (1)
Independent of the Wavecontroller function, the outputs 3 and 4 can be switched in every mode. This function
has been designed specifically for the use of Nano Wavebox / Wavebox, but in case of the electronically
controlled TUNZE® stream pumps it may be an interesting option as well. This field is used to activate the
function as well as the automatic search of the wave frequency and the direct or alternate switching action
of the Waveboxes.
"Data" field (2)
This field is used to activate the connections between Multicontroller 7096 and the computer.
"Record to data file" = saves the settings of the Multicontroller in a file on the computer.
"Restore from data file" = the saved data are restored to the Multicontrollers.
"Sent to unit" = send the computer settings to the Multicontroller.
"Receive from unit" = Multicontroller settings are sent to the computer.
69