Wavecontroller" - Oscillating Current Using Turbelle® Pumps Only - Tunze Multicontroller 7096 Mode D'emploi

"Wavecontroller" - oscillating current using Wavebox (1)
When activated, the „Night mode" function interrupts the Wavecontroller when the aquarium lighting is
switched off, and the Nano Wavebox / Wavebox remains off. In the morning when the light is switched on
again, the oscillating operation will start again.
„Wavecontroller" - miscellaneous possibilities
This function can be combined with any setting in the „Mode" field.
The resonance frequency can also be entered in „Pulse flow"; in this case the circulation pumps support
the oscillating current in the aquarium.
„Wavecontroller" - oscillating current using Turbelle® pumps only (2)
The Wavecontroller function can also be used for Turbelle® stream pumps without Wavebox. However,
we recommend to always position two Turbelle®stream opposite each other; the „Inverse" function should
be active.
Adjustment: cf. chapter titled „"Wavecontroller" - oscillation current using Nano Wavebox / Wavebox"
93