Short Description Of The Display - Tunze Multicontroller 7096 Mode D'emploi

Short description of the display

The display has been designed to ensure easy programming of the Multicontroller:
"Mode" field (1)
In this field, a simple click on the icon will select the mode of operation of the pumps, which will also be
indicated in the upper left-hand section of the field.
„Pulse only" - wave simulation only.
„Interval" - low and high tide simulation.
„Sequential" - sequential pump circuit / random flow.
„Power control" field (2)
This field is used to set the outputs of the various pumps as well as the time basis for wave action, high and
low tide or sequential pump circuit / random flow.
"Options" field (3)
This field is used to set the important options of the Multicontroller, such as feeding operation, moon phase
simulation, operation in night mode, storm for desedimentation.
67