Settings - Tone/Pulse Dialing - Hook/Flash - Pabx - Pin; Tone/Pulse Dialing; Hook/Flash - HumanTechnik Flashtel comfort II LB f Mode D'emploi

Settings - Tone/pulse dialing - Hook/Flash - PABX - PIN

Tone/pulse dialing

1. Press P and then
2. Enter one of the following three codes:
a. Code "10" for tone dialing
b. Code "11" for pulse dialing (33% M/B)
c. Code "12" for pulse dialing (40% M/B)
3. Press P to store the settings.
4. Enter another code or press P to quit the settings menu.
Note:
Nowadays, most telephone connections use tone dialing.

Hook/Flash

You can set the flash key to different flash times. The flash setting usually does not have to
be altered when the telephone is connected to a larger telephone system (see the operat-
ing manual for the telephone system).
1. Press P and then
2. Enter the four-digit unit PIN "XXXX" (the default PIN code for the telephone is "0000").
3. You can now enter one of the following codes:
a. Code "700" sets the flash time to "90 ms",
b. Code "701" sets the flash time to "110 ms",
c. Code "702" sets the flash time to "130 ms",
d. Code "703" sets the flash time to "260 ms" or
e. Code "704" sets the flash time to "600 ms".
4. Press P to store the settings.
5. Enter another code or press P to quit the settings menu.
.
#
.
English 45