Getting Started; Pack Content; Telephone Connection - HumanTechnik Flashtel comfort II LB f Mode D'emploi

Getting started

Pack content

Please check if all following components are included:
• Telephone base unit
• Telephone receiver
• Receiver cord
• Telephone cable
• 9V plug-in PSU
• SOS hand-operated transmitter and pendant cord
• Velcro-fastening armband for the radio transmitter
• Speed-dial inlay card
• Operating instructions
• Guarantee card
If any parts are missing please immediately contact your dealer or the manufacturer directly.

Telephone connection

1. Insert the receiver cord (spiral-shaped cable) into the jack marked with a receiver symbol
on the left side of the base unit and into the receiver.
2. Insert the smaller plug for the telephone cable into the "LINE" jack (back of the base
unit). Insert the larger plug into the socket for your telephone line.
3. Insert the plug-in mains adapter cable into the "DC 9 V" jack. Plug the mains adapter
into a 230 V mains socket.
Warning!
Don't place the telephone close to televisions, VDUs, fans, etc. so as to minimize the risk of
interference. Don't place the telephone in direct sunlight or close to a source of heat. Only
use the original telephone cable or a comparable cable with an international configuration.
English 33