Receiver Volume/Treble/Bass Control Settings; Hold; Inserting A Dialing Pause (Pabx); Inquiry Button (Hook/Flash) - HumanTechnik flashtel eco Mode D'emploi

Table des Matières

Les langues disponibles

Receiver volume/treble/bass control settings

The receiver volume can be adjusted during a call with the "Volume" slide

switch on the right side of the telephone.

Additional amplification can be switched on by pressing the

button.

When additional amplification is activated, the receiver volume can be rai-

sed to up to 30 dB. If amplification is switched on, the status display on the

telephone lights up. The amplification also remains on when the receiver is

placed back on its cradle. The additional amplification is deactivated by

pressing the

button again.

You can also increase treble or bass tones by an additional 10 dB using the

tone control (slide switch on the right side of the base unit).

This function enables you to interrupt a conversation temporarily without

ending the call. Press the

button to interrupt the conversation

Hold

temporarily.

Press the

button to interrupt dialing for 3.6 seconds.

This function is required in order to activate certain T-Net features.

If you press the

button, the telephone line is interrupted for a certain

length of time (300 ms – fixed setting).

English 23

Table des Matières

Table des Matières

A-4523-0