ENOM00053-0
Improper trim angle (bow rises too
high)
Set the thrust rod lower if the bow of the
boat rises above horizontal.
ENOM00054-0
Improper trim angle (bow dips into the
water)
Set the thrust rod higher if the bow of the
boat is below horizontal.
Manual Tilt type
1
2
3
1. Thrust rod
2. Higher
3. Lower
All manuals and user guides at all-guides.com
ENOF00052-0
1. Thrust rod
2. Higher
3. Lower
Trim angle adjustment (Manual tilt
type)
The transom angle adjustment
1. Stop the engine.
2. Shift into neutral.
3. Raise the outboard motor to the tilt up
4. Change the thrust rod position as fol-
ENOF00053-0
1. Push in
2. Rise the stopper
3. Pull out
5. Reinstall the thurst rod securely.
ENOF00674-A
6. Gentry lower the outboard.
ENGINE OPERATION
Power Tilt type
2 2 2
3
position.
lowing picture.
3
2
45
1
ENOF00674-B
7
1
ENOF01238-1