30
PRE-OPERATING PREPARATIONS
ENOM00041-D
Warning indicators, faults and remedy
Sound
-
-
*2
Continuous
Remarks
*1: In this case, oil pressure switch is "ON".
*2: It is necessary to stop the engine, if you want to stop the working indicators and re-set the warning system.
High speed ESG (Electronic Safety Governor)
High speed ESG is a device to prevent over revolution of the engine. If the load to the engine becomes light for some
reason, it runs at a higher speed than the usual. In such the case, and the ESG is activated not to ignite the spark
plug, therefore, the engine speed varies and be controlled under 6300min
6
Low speed ESG
Low speed ESG is a device to prevent the engine from getting damage. If the engine has problems regarding oil
pressure the low speed ESG is activated not to ignite the spark plug, the engine speed varies and be controlled
-1
under 2800min
(rpm).
All manuals and user guides at all-guides.com
Warning indicators
Lamp (LED)
ESG
On for several
sec.
-
High speed ESG
*2
ON
Low speed ESG
Description of faults
-
Normal system test when start up
Engine speed exceeds maximum
allowable RPM
Low oil pressure
-1
(rpm).
Remedy
1
2
*1