Installing Power Over Cable (Poc); Usage - Marmitek MegaView 63 Guide Utilisateur

4.5 Installing Power over Cable (POC)

The MegaView 63™ supports bi-directional Power over Cable
technology, making it easy to provide the transmitter and receiver
with supply voltage from a single point. This eliminates the need
for a power connection for the receiver near the TV. The
transmitter provides power to the receiver using the CAT5e/6
cable. This built-in technology allows you to place the receiver out
of sight behind your TV, without the need for a power outlet.

5 Usage

1. Switch on the HDMI source (for example, a TV decoder or
multimedia PC).
2. Switch on the TV or projector and select the appropriate
input. This is usually done by pressing the A/V or EXT button
on your remote control.
3. You will immediately receive images from the connected
HDMI source.
8 © MARMITEK