Publicité
Les langues disponibles
Les langues disponibles
ON/OFF (1) button for 2 seconds; an extended audible
signal will be emitted to confirm the setting.
● Key Lock
The Key Lock allows you to lock the settings of the hob to
prevent accidental tampering with the same, while leaving
the set functions enabled.
Activation:
• press
(10) Repeat the operation to deactivate.
Note: if any other function is pressed while the Key Lock is
active, the symbol
function is in use and must be deactivated if necessary in
order to use the hob.
● Automatic Heat UP
The Automatic Heat UP function allows the set power to
be reached more quickly; with this function it is possible to
cook food faster without the risk of burning it, insofar as
the temperature does not exceed the set level. This
function is available for power levels from
Activation:
• with the cooking zone on, press
will show a flashing
, alternating with the power set in
the cooking zone.
By increasing the power level of the cooking zone: the
Automatic Heat Up function remains active, with the new
temperature setting;
By decreasing the power level of the cooking zone: the
Automatic Heat Up function is deactivated.
Note: by selecting another cooking zone at the same time,
the symbol
(7) will go back to being illuminated with
light intensity, and it will be possible to proceed, also for
this zone, with the activation of the function; in any case,
the function remains active in the zone in which it has
already been set, as indicated in the Display (2).
● Pause
The Pause function allows active functions on the hob to
be suspended, bringing the cooking power to zero.
Activation:
• press
(9), the symbol
To deactivate the function:
• press
(9) the Selection bar (3) will light up
• press/slide on the Selection Bar (3) to deactivate the
function.
Note: deactivation restores the conditions of the hob
before the pause; the hob continues to work with the same
settings previously set.
will flash to indicate that the
to
.
(7), the Display (2)
will flash on the display (2)
Note: if after 10 minutes, the Pause Function is not
deactivated, the hob will turn off automatically.
Note: the Pause Function does not affect the extraction.
● "STAND ALONE" Timer
The Timer function is a countdown independent of the
cooking zones (and the extraction zone).
The Timer is activated by pressing the Zone/Display (4).
Use the symbols
Timer, which is shown in the Zone/Display (4)
Note: wait 10 seconds without pressing any other
command, so that the countdown starts.
The Timer can be set up to a maximum of 1(h) and
59(min.) The Zone/Display (4) will show the remaining
time; an acoustic signal will be emitted at the end of the
countdown.
Note: When the remaining time is less than 10 minutes, a
fixed dot will appear in the timer after the first number.
Displayed value
To switch off the Timer:
• select Zone/Display (4)
• set the duration of the Timer to Zero
(5)
● Temperature Manager (Warming Function)
Temperature Manager is a control function that allows the
maintaining of heat at a constant temperature, at an
optimised power level; ideal to keep ready-cooked foods
warm. The Temperature Manager function is activated the
first time the key
The symbol
appears in the display (2) of the zone that
is working in the Temperature Manager
Note: by selecting another cooking zone at the same time,
the symbol
(8) will go back to being illuminated with
light intensity, and it will be possible to proceed, also for
this zone, with the activation of the function; in any case,
the function remains active in the zone in which it has
already been set, as indicated in the Display (2).
• Press
(8) again to deactivate and switch off, until
the level shown in the Display (2) is brought to
Note: if there are several zones operating in Temperature
Manager (Warming Function) mode, select the desired
zone first using the Selection zone (2); the function can
also be deactivated using the Selection bar (3), by
27
(5) to set the duration of the
Remaining time
1h and 35 min
1min. and 35 sec.
(8) is pressed.
, using
.
Publicité
