JUKI MO-50e Manuel D'instructions page 6

Replace bulb with same type rated
15Watts. Use foot controller
4C-315A221 Foot controller (100v) Japan
4C-316B22 Foot controller (115v) U.S.A.
4C-326C22 Foot controller (220v) South Africa
4C-316C24 Foot controller (220v) Argentina
4C-316C26 Foot controller (220v) Korea
4C-316C28 Foot controller (220v) the Middle East
4C-326G22 Foot controller (230v) Europe
4C-326C25 Foot controller (240v) U.K.
4C-326C23 Foot controller (240v) Australia
Contents
1. Important Safety Instructions
5. Contents
7. Details Of The Machine
9. Preparing The Machine
11. Preparing The Machine
13. Using The Machine
15. Using The Machine
17. Threading
19. Threading
21. Threading
23. Threading
25. Trial Sewing/ Thread Tension
27. Adjusting The Thread Tension
29. Adjustments And Settings
31. Differential Feed*
33. Practical Sewing
35. Maintenance
37. Trouble Shooting Guide
39. Technical Data
5
- Accessories
- Accessory Box
- Looper Cover
- Waste Collector
- Cloth Plate Cover
- Attaching The Foot Control
- Sewing Speed
- Assembling The Thread Stand
- Thread Cones
- Power/ Light Switch
- Handwheel
- Presser Foot Lifter
- Changing The Presser Foot
- Inserting Needles
- Raising The Upper Knife
- Threading/ Preparation
- Upper Looper (Blue)
- Lower Looper (Red)
- Right Needle (Green)
- Left Needle (Yellow)
- After Threading
- Sewing Test
- Check Your Trial Run
- Stitch Length
- Cutting Width
- Adjusting The Cutting Width
- How To Use The Needle Plate
- Differential Feed*
- Stretching Effect
- Pushing Effect
- Gathering*
- Adjustment
- 3 thread Overlock
- 3 thread Rolled Hem
- Unpicking Seams
- Changing Light Bulb
- Cleaging And Lubricating