Standard Hardware & Options; General Information - Heidolph 1000 Mode D'emploi

E
product
INCUBATOR 1000
heater module
with incubator hood, flat, consisting
of: upper half, lower half,
deflector plate, flat
or incubator hood, high, consisting
of: upper half, lower half,
deflector plate, high
holder
screw
(to secure holder)
spring washer
(to secure holder)
knurled bolt (to secure lower half
of hood)
Deflector plate
or Deflector plate
Instruction Manual
Power cord
Unpack your item carefully.
Inspect for damage and report such damage or missing parts to your supplier right
away.
Read your Instruction Manual carefully. Take time to save time when working with
your product. Make sure that every user has read and understood the Instruction
Manual.
Please store the Instruction Manual in a place easily accessible to every user.
A so-called EURO-plug (DIN 49441 CEE 7/VII 10/ 16 A 250 V) is standard on all of
the products.
For the Continental US they feature a US-standard plug (NEMA Pub.No.WDI.1961
ASA C 73.1 . 1961 page 8 15A 125V).
For using the item in a country with deviating outlet / plug systems, we recommend
to use approved adapters or to have an electrician replace the standard plug with
one suiting your needs.
As shipped, the item features a protective ground wire. When replacing the original
plug, make sure to reconnect this protective ground wire in the new plug !
STANDARD HARDWARE & OPTIONS

GENERAL INFORMATION

IF ALL ELSE FAILS, READ THESE INSTRUCTIONS !
quantity P/N
230/240V 50/60Hz
1 549-90010-00
1 549-90040-00
optional 549-90030-00
1 21-005-014-48
2 02-01-04-02-24
2 02-03-01-01-09
3 11-008-003-99
1 23-08-02-04-04
1 23-08-02-04-03
1 01-005-004-23
1 14-007-003-81
16
P/N
115V 50/60Hz
549-90020-00
549-90040-00
549-90030-00
21-005-014-48
02-01-04-02-24
02-03-01-01-09
11-008-003-99
23-08-02-04-04
23-08-02-04-03
01-005-004-23
14-007-003-89