Publicité
Les langues disponibles
Les langues disponibles
10.Electromagnetic Compatibility (EMC)
Product has been tested for compliance with current regulatory standards regarding its capacity to block
EMI (electromagnetic interference) from external sources.
Some procedures can help reduce electromagnetic interferences:
•
Use only Arjo cables and spare parts to avoid increased emissions or decreased immunity which
can compromise the correct functioning of the equipment.
•
Ensure that other devices in patient-monitoring and/or life-support areas comply to accepted
emissions standards.
Wireless communications equipment such as wireless computer network devices, mobile
phones, cordless telephones and their base stations, walkie-talkies, etc. can affect this
equipment and should be kept at least 1.5 m away from the equipment.
Intended Environment: Home Healthcare Environment and Professional Healthcare facility
environment.
Exceptions: HF Surgical Equipment and the RF Shielded room of an ME SYSTEM for magnetic
resonance imaging.
Use of this equipment adjacent to or stacked with other equipment should be avoided because
it could result in improper operation. If such use is necessary, this equipment and the other
equipment should be observed to verify that they are operating normally.
Guidance and manufacturer's declaration - electromagnetic emissions
Emissions Test
RF emissions CISPR - 11
RF emissions CISPR - 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
WARNING
WARNING
Compliance
Group 1
Class B
Class A
Complies
21
Guidance
This equipment uses RF energy only for its
internal functions. Therefore its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
This equipment is suitable for use in all
establishments, including domestic
establishments and those directly connected to
the public low voltage power supply network that
supplies buildings used for domestic purposes.
Publicité
