Publicité
Trouble
Copies come out too dark.
Is the copier in the auto exposure mode?
Is the copier in the manual exposure
mode?
Was more than one drawer pulled open at
Drawer cannot be closed.
one time?
Copies are dirty.
Is the platen or the original cover dirty?
Copy image is askew.
Are the originals set correctly?
Paper keeps being misfed.
Is the paper set correctly in the drawers?
Is paper curled, folded over or wrinkled?
Is there any misfed paper or loose scraps
of paper remaining inside the copier?
Black lines appear on the
copy when using the
Is the slit glass dirty?
optional DF.
All manuals and user guides at all-guides.com
Checks
Action
Perform "Auto exposure".
Adjust the exposure to the correct degree
using the copy exposure adjustment keys.
To adjust the overall exposure, change the
initial value of the manual exposure in each
original mode.
Pull open the drawer that is closed, and
close it together with the drawer that could
not be closed.
Clean the platen and/or the original cover.
When originals are set on the platen, align
their edges with the correct original size
scale for their size.
When originals are set in the optional DF,
align the original insertion guide securely,
and set the original.
Set paper correctly.
Copied paper may curl badly and it may
cause paper misfeeds depending on the
type of paper and keeping state.
Remove the paper from drawer and turn it
over and reset.
Replace the paper with new paper.
Carry out the appropriate procedure to
remove the paper.
Clean the slit glass.
Page
114
35
114, 115
-----
165
36
29
29
29
141
165
154
Publicité
