Publicité
INSTALLATION PRECAUTIONS
Environment
CAUTION
• Avoid placing the copier on or in locations which are
unstable or not level. Such locations may cause the
copier to fall down or fall over. This type of situation
presents a danger of personal injury or damage to the
copier. ............................................................................
• Avoid locations with humidity or dust and dirt. If dust
or dirt become attached to the power plug, clean the
plug to avoid the danger of fire or electrical shock. .......
• Avoid locations near radiators, heaters, or other heat
sources, or locations near flammable items, to avoid
the danger of fire............................................................
• To keep the copier cool and facilitate changing of parts
and maintenance, allow access space as shown
below.
Leave adequate space, especially around the left and
back cover, to allow air to be properly ventilated out of
the copier. .....................................................................
Other precautions
• Adverse environmental conditions may affect the safe
operation and performance of the copier. Install in an
air-conditioned room (recommended room
temperature: around 68°F, humidity: around 65%RH)
and avoid the following locations when selecting a site
for the copier.
. Avoid locations near a window or with exposure to
direct sunlight.
. Avoid locations with vibrations.
. Avoid locations with drastic temperature fluctuations.
. Avoid locations with direct exposure to hot or cold air.
. Avoid poorly ventilated locations.
7
All manuals and user guides at all-guides.com
• DO NOT use a power supply with a voltage other than
• Plug the power cord securely into the outlet. If metallic
• Always connect the copier to an outlet with a ground
Other precautions
• Connect the power plug to the closest outlet possible
• The power supply cord is used as the main disconnect
• Keep the plastic bags that are used with the copier
Power supply/Grounding the copier
WARNING
that specified. Avoid multiple connections in the same
outlet. These types of situations present a danger of
fire or electrical shock. ...................................................
objects come in contact with the prongs on the plug, it
may cause a fire or electric shock..................................
connection to avoid the danger of fire or electrical
shock in case of an electric short. If an earth
connection is not possible, contact your service
representative. ..............................................................
to the copier.
device. Ensure that the socket/outlet is
located/installed near the equipment and is easily
accessible.
Handling of plastic bags
WARNING
away from children. The plastic may cling to their nose
and mouth causing suffocation. .....................................
Publicité
