Burkert 2300 Guide Rapide page 6

▶ Following interruption of the process, ensure that the
process is restarted in a controlled manner. Observe the
sequence:
1. Apply electrical or pneumatic supply.
2. Charge with medium.
▶ Use the device only when it is in perfect condition and in
accordance with the operating instructions.
▶ For applications planning and operation of the device, observe
the plant-specific safety regulations.
▶ The plant owner is responsible for the safe operation and
handling of the plant.
▶ Observe the general rules of technology.
Please observe the following in order to protect against
damage to the device:
▶ Feed only those media listed in chapter "7 Technical data" into
the medium ports.
▶ Do not place the valve under mechanical stress (e.g. by placing
objects on it or standing on it).
▶ Do not make any external modifications to the valves. Do not
paint housing parts or screws.
▶ The exhaust air can be contaminated by lubricants in the
actuator.
▶ Transport, install and remove heavy device only with the aid of
a second person and using suitable tools.
6
All manuals and user guides at all-guides.com
5
5.1
Germany
International
You can also find the contact addresses online at:
www.burkert.com
5.2
A precondition for the warranty is that the device is used as
intended in consideration of the specified operating conditions.
5.3
Operating instructions and data sheets for Type 2300 can be found
online at: www.country.burkert.com
English
Type 2300
General notes
GENERAL NOTES
Contact addresses
Bürkert Fluid Control Systems
Sales Centre
Christian-Bürkert-Str. 13–17
D-74653 Ingelfingen
Tel. +49 (0) 7940 - 10 91 111
Fax +49 (0) 7940 - 10 91 448
E-mail: info@burkert.com
Warranty
Information on the Internet