Publicité
Les langues disponibles
Les langues disponibles
Backwall Duct Location
1. Locate studs in wall.
2. Measure and cut an opening for thimble as illustrated
in figure below. Cutout should be 6
circle.
3. Ducting is completed in Backwall Duct Connection
section.
8"
Floor Duct Location
1. Locate studs in floor.
2. Measure to locate center of floor duct location. See
figure below.
• For installation with counter top or backsplash
behind range, measure 13
"A"
• For installation without counter top or backsplash
behind range, measure 11
"A".
3. Cut an opening for floor transition piece as illustrated
in figure below. Cutout should be 7
square. If opening is not correctly aligned, duct does
not connect properly.
4. Ducting is completed in Floor Duct Connection
section.
7
10
/
"
8
All manuals and user guides at all-guides.com
1
/
inch diameter
8
4-5/16"
1
/
inches for dimension
8
5
/
inches for dimension
8
1
1
/
x 7
/
inches
4
4
A
Duct Length
Maximum allowable duct length is 60 equivalent feet.
• Use Recommended Standard Fittings in figures
below to calculate duct length.
• Flexible duct is not recommended. However, if it is
used, one foot is equal to two feet of smooth metal
duct.
Recommended Standard Fittings
31/4 x 10 Wall Cap without Flap
7
Publicité
