Publicité
Les langues disponibles
Les langues disponibles
Cooking with Griddle Module
WARNING
To avoid risk of serious personal injury, property
damage, or fire, do not leave surface elements
unattended while in operation. Grease and spillovers
can ignite causing a fire.
CAUTION
To avoid risk of property damage, do not use metal
cooking utensils on griddle.
1. Before using griddle for first time, wash with warm
soapy water. Rinse and dry thoroughly. Lightly wipe
top of griddle surface with cooking oil to prevent food
from sticking (do not use shortening or butter). Let
cooking oil remain on the surface.
2. Push in and turn right or left front control knob
(depending on where grill is located) to select a
temperature.
• If you use right or left rear control knob indicator
lights, but element does not heat and fan does not
operate.
3. Place food on griddle.
• Do not allow the griddle pan to become full of
grease. Clean after each use.
4. When finished cooking, turn control to "OFF".
5. Clean grill pan and griddle.
• Do not clean griddle element. Soil on element burns
off during subsequent use.
• Always use nylon, hard rubber, or wooden kitchen
tools on conventional no-stick finish.
Cooking with Coil Element Module
WARNING
To avoid risk of serious personal injury, property
damage, or fire, do not leave surface elements
unattended while in operation. Grease and spillovers
can ignite causing a fire.
1. Push in and turn surface element control to desired
setting.
• Range has two indicator lights; one for both right
and left side module elements. When either front or
rear element is on, corresponding indicator light
glows red.
2. When finished cooking, turn control to "OFF".
All manuals and user guides at all-guides.com
Cooking with Solid Element Module
• When using for first time, heat element on "HI" for
• Red lacquer dot in middle of burner eventually
• Each surface unit has an individual surface
To avoid risk of serious personal injury, property
damage, or fire, do not leave surface elements
unattended while in operation. Grease and spillovers
can ignite causing a fire.
1. Push in and turn surface element control to desired
setting.
• Range has two indicator lights; one for both right
2. When finished cooking, turn control to "OFF".
14
about five minutes to burn off protective factory
seal. Some minor smoking is normal when heating
burner for first time.
wears away. This does not affect burner
performance.
temperature limiter. Temperature limiter prevents
element surface from exceeding 880°F. Limiter
reduces temperature if burner has been left on for
an extended period of time without a pan in place or
if heat has built up as a result of improper contact
with the pan. Solid disk elements hold heat longer
than coil elements. Therefore, heat can be turned
off earlier in cooking process and food continues to
cook using residual heat.
WARNING
and left side module elements. When either front or
rear element is on, corresponding indicator light
glows red.
Publicité
