Publicité
Les langues disponibles
Les langues disponibles
8. Loosen front screw attaching floor elbow duct plate and
floor elbow duct.
9. Slide floor plate down tight against rubber gasket and
tighten screw.
10. Seal joint between blower and elbow transition piece
with duct tape.
• Check under range to ensure anti-tip bracket is
engaged.
11. Install storage drawer.
Level Range
Carefully level range using legs provided. Range must be
level to cook and bake uniformly.
• Place a level on top oven rack or on top of range
when leveling.
• Leveling legs must be extended out 1/4 inch to
engage anti-tip bracket.
Removal and Replacement of Range
1. Disconnect electrical supply at house circuit breaker.
2. Disconnect range venting.
3. Disconnect power supply cord.
4. Remove anti-tip bracket.
5. Install anti-tip bracket into new location using
instructions provided with bracket.
6. To reinstall range follow instructions in Installation
section of this manual.
All manuals and user guides at all-guides.com
Features
Modules
This range features a choice of 5 different modules shown
below. Modules are interchangeable and may be installed
on right or left side of the cooktop. Information on how to
purchase modules can be obtained by calling your local
authorized dealer.
Smoke Control Grill Module
Coil Element Module
12
Solid Disk Element Module
Smooth Top Module
Griddle Module
Publicité
