Atlas Copco LP 9-20 P Prescriptions De Sécurité Et Instructions Pour L'opérateur page 17

LP 9-20 P
Noise data
Measured
L
WAm
Model dB re 1 pW
LP 9-20 P 99
Sound power level:
In accordance with Directive 2000/14/EC.
The measured sound power level is based on max. rpm = 2850 and a pressure of 110 bar (1600 psi).
Sound pressure level:
In accordance with EN/ISO 11203.
Noise declaration statement
Guaranteed sound power level in accordance with directive 2000/14/EC.
Sound pressure level in accordance with EN/ISO 11203.
Please see table "Noise data".
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not adequate for use in risk assessments, and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
machine is used, as well as upon the exposure time and the physical condition of the user, and the condition
of the machine.
We, Atlas Copco, cannot be held liable for the consequences of using the declared values, instead of values
reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have
no control.
© 2008 Atlas Copco Construction Tools AB
total emitted A-weighted sound power level
Declared
L
WAd
dB re 1 pW
100
|
No. 3392 5054 83 e
Safety and operating instructions
Guaranteed
L K value
WAg
dB re 1 pW dB
101 1.2
|
2008-06-30
Sound pressure
level
1 m L
PA
dB re 20 µPa
88
17