Rinsing cycle:
•
Prepare the bottle with sterile distilled water,
•
Lift the connector and put it above a sink,
•
Press the foot pedal to start the program. Three beep sounds and the blinking of the indicator
lamp of the "Cleaning" mode confi rms the end of the cycle,
Press the "Purge" mode selector to exit this mode (this cycle must be then restarted).
(Note: it is possible at any time to press the foot pedal to stop the program in progress.)
For information, the duration of the 'Cleaning 'mode cycle is about 30 seconds and the quantity of liquid
necessary in the bottle is 50 ml (note that one LED corresponds to 10 seconds).
42