Cleaning And Maintenance; Cleaning The Heater Plate; Starting The Cleaning Program - Miele professional PM 1210 Mode D'emploi

Starting the
cleaning program

Cleaning the heater plate

Regular cleaning and maintenance of the heater plate is essential for
protecting the roller drive and the winder. Refer to the instructions in
the Miele Ironing Handbook. Always wax the heater plate after
cleaning. Failure to exercise due care and attention can result in a
significant reduction in the service life of the machine.
The heater plate for this rotary iron is made of aluminum.
Coarse-grained scouring agents or abrasive cleaning cloths must
not be used for cleaning aluminum heater plates.
Only use the Miele cleaning cloth, a waxing cloth and ironing wax,
available as an optional accessory.
Residue (such as starch and detergent) may deposit in the heater
plate. For this reason, clean the heater plate as appropriate for the
degree of soiling before starting work.
From machine number 120610797 in the case of the PM 1210 and
machine number 120610687 in the case of the PM 1214, all rotary
irons in the PM 1210, 1214 and 1217 product ranges are supplied
with the waxing and cleaning display function (red display
symbol ).
When the red display symbol  lights up, this signals that the
heater plate requires cleaning and waxing in cleaning mode.
Press and hold the  button for more than 3 seconds.

The iron is now in the cleaning program. 80 °C (175 °F) is shown in
the display.
If the current ironing temperature is above 80 °C (175 °F), the 
symbol is displayed and the iron cooled down. You can start the
cleaning process once the symbol goes out and an ironing
temperature of 80 °C (175 °F) is indicated in the display.
en-CA - Cleaning and maintenance
25