Warning And Safety Instructions; Correct Application; Technical And Electrical Safety - Miele professional PM 1210 Mode D'emploi

en-CA - Warning and Safety instructions
Please read the operating instructions before using the rotary iron for the first time. They
contain important information on the safety, use and maintenance of the rotary iron.
This prevents both personal injury and damage to the machine.
If other persons are being shown how to operate the rotary iron, they must be given
and/or informed of these important safety instructions.
Keep these operating instructions in a safe place and pass them on to any future owner.

Correct application

This rotary iron must be used as described in these instructions and must be checked on a
regular basis to make sure it is functioning correctly. Maintenance must be carried out
when necessary.

This rotary iron is only intended for ironing fabrics that were washed in water, and which
have a care label stating that the article is suitable for machine ironing.

This rotary iron is intended for use in commercial settings. It is not intended for domestic
use. If the rotary iron is operated in a publicly accessible place, it is the supervisor's
responsibility to ensure suitable measures are in place to protect users from any source of
risk or danger.

This rotary iron is not intended for outdoor use.

Technical and electrical safety


This rotary iron should not be operated in the same room as dry-cleaning equipment
using solvents containing PERC or CFCs.

The rotary iron should only be operated in a suitable dry room.

Only operate the rotary iron when all removable outer casings are in place so that it is
impossible to touch an electrical, moving, or heated component.

Do not damage, remove, or bypass the safety components or control elements of the
rotary iron.

Do not make any alterations to the ironer, unless authorized to do so by Miele.

If the controls or the electrical cabling insulation has been damaged, the rotary iron must
not be used until it has been repaired.

Repair and maintenance work should be performed by a Miele service technician. Work
by unqualified persons could be dangerous.

Defective components should only be replaced by genuine Miele original spare parts.
Only with original Miele parts can the manufacturer guarantee the safety of the appliance.

The electrical safety of this rotary iron can only be guaranteed when connected to a
correctly installed earthing system on site. It is most important that this standard safety
requirement is present and tested regularly. If in any doubt, please have the on-site
electrical system tested by a qualified electrician. Miele cannot be held liable for damage
or injury cased by the lack or inadequacy of an effective earthing system.

The rotary iron is only completely isolated from the electricity supply when switched off
at the mains isolator, or the (on site) mains fuse is disconnected.
6