Ironing Temperature; Setting The Ironing Temperature; Changing The Value Of A Temperature Selection Button - Miele professional PM 1210 Mode D'emploi

en-CA - Use
Ironing
temperature
Setting the
ironing
temperature
Changing the
value of a
temperature
selection button
18
The ironing temperature should be selected according to the type of
fabric being ironed.
Type of fabric Symbol
Nylon / Polyester / 
Other synthetics
Silk / Wool

Cotton / Linen 
Temperature selection buttons
The heater plate temperature can be set either via the temperature
selection buttons or alternatively via the  or – buttons.
If the ironing temperature is changed from a higher to a lower level,
the heater plate has to cool down first. In this case, the heater
element of the iron is switched off. The  red symbol signals that the
current heater plate temperature is still too high. When the  symbol
goes out, this indicates that the selected temperature has been
reached.
Press the   button on the control panel to access the ironing

temperature selection mode.
The   button will then be highlighted with a bar underneath.
Now press one of the three temperature selection buttons.

(For example,  temperature selection button)
The selected temperature selection button will be highlighted with a
bar underneath and the heater plate heated / cooled to the
appropriate temperature.
Press the temperature selection button you want to change the

value for.
Keep it pressed in. The bar will light up underneath it and the current
temperature value will appear in the display.
Press the  or – button to set the temperature you want to save for

that button.
Then press and hold the temperature selection button highlighted

with a bar underneath until it flashes once.
Temperature Preset value
100–110 °C 110 °C (230 °F)
(212-230 °F)
111–150 °C 125 °C (257 °F)
(231-302 °F)
151–180 °C 180 °C (356 °F)
(303-356 °F)