Changing The Value Of A Roller Speed Selection Button; Laundry Feed - Miele professional PM 1210 Mode D'emploi

en-CA - Use
Changing the
value of a roller
speed selection
button

Laundry feed

20
Press the roller speed selection button you want to change the

value for.
Keep it pressed in. The bar will light up underneath it and the current
roller speed value will appear in the display.
Press the  or – button to set the roller speed you want to save for

that button.
Press and hold the roller speed selection button until it flashes

once.
The new roller speed is now saved for that button.
Press the  button to start the ironing process.

The heater plate engages and the roller begins to rotate.
 Items with buttons must be fed in such a way that the buttons
are pointing towards the roller and press into the roller cover during
ironing.
Otherwise there is a risk of them being damaged or torn off when
being fed into the heater plate.
To protect the heater plate, place a cloth over zippers, metal
buttons, and metal hooks before ironing.
Do not iron any kind of metal and plastic buckle or extremely raised
buttons (such as ball-shaped buttons).
Now lay the item parallel to the roller at the beginning of the laundry

infeed table.
Smooth the item.

Feed the item evenly into the machine for ironing.

Do not feed small items into the iron on only one side.
If laundry is fed in on just one side, the heat will only be reduced on
one side and the load only exerted on the roller padding on one
side. If the laundry continues to be fed in on one side only, this will
be signaled by an audible signal and the  red symbol or 
symbol appearing in the display.
Use the entire roller width wherever possible and distribute small
items evenly on the laundry infeed table.