Use; Preparing For Use; Ironing - Miele professional PM 1210 Mode D'emploi

Preparing for use

Turn on the on-site main switch for the power supply.

Press the  button to switch on the iron.

The  red display symbol flashes.
Now activate the finger guard by lifting it.

The finger guard is a safety device that is checked at every startup.
The  red symbol will appear in the display and the heater plate will
heat up.

Ironing

Wait until the heater plate has reached the minimum temperature.

The  button begins to flash as soon as the minimum temperature
has been reached.
The rotary iron is ready for operation when the set temperature is
reached and the  symbol no longer appears in the display.
Now press the flashing  button to start up the iron.

The ironing process will begin.
Useful tip: Allow the roller to rotate for about 5 minutes to enable the
heat to equalize between the heater plate and the roller.
 When the machine has heated up, there is a danger of burns on
the edge of the heater plate.
Warning labels on the outer casing of the heater plate indicate the
danger of burns.
en-CA - Use
17