Pedal Installation; Saddle Height Adjustment - Schindelhauer Bikes Oskar Notice D'utilisation

3.3. Pedal installation

1. Put the washers on the pedal threads (Figure 7).
2. Apply the supplied assembly paste to the pedal threads.
3. Bolt the pedals onto the crankarms and tighten them to a torque of 35
Nm (Figure 8).
Please be aware that the right pedal has a right-hand thread
and the left pedal a left-hand thread. The left pedal also has
a machined groove for identification (Figure 7).
left pedal
groove
Figure 7
right pedal

3.4. Saddle height adjustment

4. Loosen the bolt of the seat post clamp (5mm hex key) on the right side
of the frame to allow adjusting the saddle height.
5. Start with the saddle at the height of your hips when you stand next
to the e-bike and tighten the bolt of the seat post clamp to 8 Nm.
6. Check the saddle height with the crank arm pointing downwards
(Figure 9) by sitting on the saddle, e.g. leaning against a wall. If in
doubt, ask a second person to help you.
68
Figure 8