Lumbar Support; Maintenance - Grammer ROUTE 66 KINGMAN Mode D'emploi

Seat functions and operation
* if fitted ** depending on model
28

Lumbar support

2
With the front (1) and back (2) switch the
curvature in the upper and lower area of the
-
+
1
backrest upholstery can be adjusted
individually.
1
2
By setting the respective switch to "+", the air
compartments will be filled. By setting it to "-",
they will be emptied.
When the backrest cushion does no longer
respond to pressing "+", the maximum
1176
curvature has been reached and the switch
should be released.

Maintenance

Dirt can impair the function of the seat,
So make sure you keep your seat clean.
Upholstery does not need to be removed from
the seat frame for cleaning.
1177
ATTENTION: Do not clean the seat with a
pressure washer!
When cleaning the upholstery, make sure the
upholstery is not soaked.
Use standard commercially available
upholstery or plastics cleaning agent. Test
first for compatibility on a small, concealed
area.
*** optional extra
Caution: take care with the
backrest - it may jerk forward and
cause injury!
When cleaning the backrest
cushion, the backrest must be
held in place when operating the
backrest lever.
GB