Seat Heater; Lumbar Support; Backrest Adjustment - Grammer MSG 75G 721 Mode D'emploi

* if fitted ** optional extra
Seat functions and operation
0
1337
1
0
2
1
2
1338
1339

Seat heater * **

The seat heater can be turned on/off by
pressing the switch.
1 = seat heater OFF
2 = seat heater ON

Lumbar support

The lumbar support increases both the
seating comfort and the performance of the
driver.
By turning the adjustment knob upward, the
curvature in the upper part of the backrest
cushion can be adjusted. By turning the knob
downward, the curvature in the lower part of
the backrest cushion can be adjusted.
0 = No curvature
1 = Max. curvature at the top
2 = Max. curvature at the bottom

Backrest adjustment

Pull up the lever for backrest adjustment to
release the backrest catch. By exerting
pressure on or off the front or rear part of the
seat pan it can be moved to the desired
position.

After the adjustment, the lever must
latch into the desired position with an audible
click. It should not be possible to move the
backrest into another position after it has been
locked.
When the backrest is folded forward,
fluted metal locking devices on either side –
left and/or right – protrude from the bottom of
the backrest and, during the adjustment
procedure, can cause shearing and crushing
of the body of the person performing this task.
– DO NOT REACH INTO THIS DANGER
ZONE –
23