Getting Started; Unpacking - Evolution FURY 5-XS Instructions D'origine

should be informed of the factors that
influence exposure to dust e.g. type of
material being cut and the importance of
local extraction (capture or source) and the
proper adjustment hoods/baffles/chutes.
• Use proper extension cord. Make sure
any extension cord is in good condition.
When using an extension cord, be sure to
use one heavy enough to carry the current
your machine will draw. An undersized cord
will cause a drop in line voltage resulting in
loss of power and possible overheating.
• Always use safety glasses. Also use a
face or dust mask if the cutting operation is
dusty. Everyday eyeglasses only have impact
resistant lenses, they are NOT safety glasses.
• Maintain tools with care. Keep tools
sharp and clean for best and safest
performance. Follow instructions for
lubricating and changing accessories.
• Disconnect from the power supply
before servicing, cleaning and/or when
changing accessories, such as blades.
• Use recommended accessories.
Only use genuine Evolution accessories.
• Check for damaged parts. Before further
use of the tool, a guard or other part that is
damaged should be carefully checked to
determine that it will operate properly and
perform its intended function - check for
alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any
other conditions that may affect its operation.
A guard or other part that is damaged should
be properly repaired or replaced.
• Keep hands out of the path of the
saw blade.
• Never reach around the saw blade.
• Turn off machine and wait for saw
blade to stop before making any
fence adjustments.
• Never pull or carry the tool by the
power cord. Carrying or pulling the tool by
the power cord could cause damage to the
insulation or the wire connections resulting
in the possibility of electric shock or fire.
• When transporting the machine use
a transportation device. Never use the
guards for handling or transportation.
www.evolutionpowertools.com
• During transportation the upper part
of the saw blade must be lowered fully
and covered by the guard.
• All operators using this machine must
read the instructions and familiarize
themselves with the machines workings.
• Never leave the saw running and
unattended. Do not leave the saw until
the saw has been switched OFF, and the
blade has come to a complete halt.

GETTING STARTED

(4.1)

UNPACKING

Caution: This packaging contains sharp
objects. Take care when unpacking.
Remove the machine, together with the
accessories supplied from the packaging.
Check carefully to ensure that the machine
is in good condition and account for all the
accessories listed in this manual. Also make
sure that all the accessories are complete.
If any parts are found to be missing,
the machine and its accessories should be
returned together in their original packaging
to the retailer. Do not throw the packaging
away; keep it safe throughout the guarantee
period. Dispose of the packaging in an
environmentally responsible manner.
Recycle if possible. Do not let children
play with empty plastic bags due to the
risk of suffocation.
10