Push Stick; Environmental Protection - Evolution FURY 5-XS Instructions D'origine

Fig. 40
Fig. 41
hole for the blade guard is level with the top of the blade and re-
tighten the bolt. Replace the table insert.

PUSH STICK

A plastic push stick (Fig. 40) is provided with the machine and has
its own dedicated storage bracket to the LH side of the machines
main body. When not in use store the push stick on the machine.
(Fig. 41)
Note: If the push stick becomes damaged it should be replaced.
If the operator makes their own push stick, we recommend that it
follows the same pattern as that supplied. Replacement push sticks
are available from Evolution Power Tools.

ENVIRONMENTAL PROTECTION

(6.4)
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
24
www.evolutionpowertools.com