Device Description; Location Of Back4 Controls - Winback Back4 Manuel Utilisateur

Technical:
• The device and its accessories must be checked regularly to ensure that they are functioning properly.
It is recommended to have the equipment serviced by the manufacturer every two years.
• The device must be used exclusively with the accessories provided. Using inappropriate accessories
might lead to electrical burns or cause the device to malfunction.
• The device must be used under conditions of standard atmospheric pressure (around 1013 hPa), within
a temperature range of -10°C and 40°C, and within a relative humidity range of 20% to 90%.
• To avoid the risk of electric shock, always unplug the device from the electrical outlet before carrying
out any maintenance procedures*.
• Particular care should be taken when using the device in proximity to other equipment that may generate
electromagnetic interference. Avoid using it around other electrical equipment.
• Never use accessories that are cracked or broken.
• Ensure that your electrical network complies with the regulations in force.
• Never bend the power cord or the cables of the accessories excessively.
• Keep liquids away from the device.
• Do not set up the device in a place where it is difficult to remove the power plug.
• A stable wifi connection is mandatory

3. DEVICE DESCRIPTION

3.1 LOCATION OF BACK4 CONTROLS

Note: Dimensions are in millimeters
32
*WARNING: Only SWIMS S.A.S./WINBACK technicians and/or technicians approved by the
company are permitted to open the device. Users are strictly forbidden to open the device or try
to change any components..
2 4 5
3 6
1
7
404
1 Front ON/OFF button
Output 1
2
3 Neutral output
4 Output 2
5
Emergency button output
6 Rear electrical socket
7
Rear power button