Installation Of The Pressure Sensor - Biral A 802 Instructions D'installation Et D'entretien

77
Direction of flow
The arrow on the pump housing
indicates the direction of flow.
The motor shaft always
has to be horizontal,
never vertical.
4.5 Installation
of the pressure sensor
Note:
Do not mount the pressure
sensor until the pump
has been installed
in the system.
– Place the O-Ring (1)
in the seat provided.
– Insert the sensor housing,
taking care not to damage
the O-ring.
– Insert the split ring (2)
english
961339_00
1
2
961338_00