Settings; Control Panel - Biral A 802 Instructions D'installation Et D'entretien

83 english

7. Settings

Danger of burns!
At high media temperatures the pump
can become so hot that only the control keys
can be touched.
Pump settings can be adjusted via:
– The pump control panel
– The R100 remote control unit
The following table shows the functions that can be selected
and activated with the two control units (3).
Function
Proportional pressure control
Constant pressure control
Setting the delivery head
Operation at the MAX characteristic curve
Operation at the MIN characteristic curve
Operation at a constant characteristic curve
Temperature control
Fault message reset
Activation/deactivation
of the pump control keyboard
Assignment of a pump number
Readout of various data
ON/OFF
«–» = Function not available via this control unit.

7.1 Control panel

and key (A1) for setting type of control.
or key (A1) for setting the delivery head
with illuminated symbols (A2) to indicate delivery head.
Illuminated symbols (A3) to indicate delivery head and type of control.
Illuminated symbol: Fault message (red), operating message (green)
See Section 7.5
Control panel R100
3 3
3 3
3 3
3 3
3 3
3
–
3
–
3 3
3
–
3
–
3
–
3 3