Porsche Mobile Charger Connect Guide D'installation page 22

Electrical Fixed Connection
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
Fig. 7: Screwing charging dock to assembly plate
EL
4. Screw the charging dock to the assembly plate.
CZ
HU
Electrical Fixed Connection
PL
This chapter is only valid for the following countries:
HR
South Korea, Singapore, Uruguay.
f Refer to chapter "Safety" on page 16.
SR
The plug of the connecting cable must be fastened to
SK
the control unit with a screw.
f Refer to chapter "Changing Supply Cables and
SL
Vehicle Cables" in the operating instructions for
ET
the Porsche charger.
LT
LV
RO
BG
MK
20
Electric shock, fire
DANGER
Components carry electric voltage. Improper
electrical installation of the charger may cause short
circuits, electric shocks, explosions, fire or burns.
Before starting work, observe the following safety
regulations:
e De-energise the system.
e Secure against switching back on.
e Confirm de-energised state.
e Earth and short-circuit.
e Cover or isolate adjacent live components, secure
danger area.
Information
The procedure for connecting to the mains supply is
described here using the basic wall mount as an
example.
The colour of the leads shown in this chapter on the
infrastructure side meets European standards and
may be different locally.
e Adapt the connection according to local
conditions.
Electrical fixed connection
to building installation
(single-phase)
Information
The fixed connection box is not supplied. A fixed
connection box is required for proper installation and
connection of the connecting cable.
For details of items supplied:
f See Operating Manual for the Porsche charger.
Overview
Fig. 8: Connections for fixed connection and control unit
(single-phase)
A Fixed connection box
B Control unit
Connection table for fixed connection
Designation Wire colour
Live lead Brown
Ground lead Green/yellow
Neutral lead Blue
International
connection
designation
L1
PE
N