Porsche Mobile Charger Connect Guide D'installation page 20

Installing Basic Wall Mount
Installing Basic Wall Mount
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
EL
Fig. 1: Drilling dimensions
CZ
1. Mark the drill holes on the wall.
HU
2. Drill the mounting holes and insert wall plugs.
PL
3. Press the basic wall mount 2 into the cable
guide 1 from the front.
HR
4. Screw the basic wall mount onto the wall.
SR
SK
SL
ET
LT
LV
RO
BG
MK
18
Fitting connector fastener
Fig. 2: Distance from wall mount to connector fastener
When installing the connector fastener, always keep
it 200 mm away from the basic wall mount.
Fig. 3: Drilling dimensions
1. Take the connector fastener 1 out of the cover 2.
2. Mark the drill holes on the wall.
3. Drill the mounting holes and insert wall plugs.
4. Screw the connector fastener 1 onto the wall.
5. Fit the cover 2 onto the connector fastener 1
from below and push upwards.