ST CP1 430 Li 48 Serie Manuel D'utilisation page 117

5. Battery power reserve
is low.
6. The battery charger is
not charging the battery.
13. ATTACHMENTS ON REQUEST
13.1 "MULCHING" KIT
Finely chops the cut grass and leaves it on the lawn,
instead of collecting it in the grass catcher (for machines
equipped with it) (Fig.31).
13.2 BATTERIES
Different capacity batteries are available to suit specific
operating requirements (Fig. 32). The list of approved
batteries for this machine can be found in the "Technical
Data" table.
13.3 BATTERY CHARGER
Device used to recharge the battery (Fig.33).
Severe working conditions requiring
greater current absorption.
Battery is insufficient for operating re-
quirements.
Battery is not correctly inserted in the
battery charger.
Unsuitable environmental conditions.
Dirty contacts.
The battery charger is not energised.
Faulty battery charger.
Optimise operations (par. 7.2.1).
Use a second battery or extended battery (par.
13.2).
Check it is correctly inserted (par. 7.2.3).
Recharge the battery in places with suitable
temperatures (see battery/battery charger in-
struction manual).
Clean the contacts.
Check it is plugged in and the power socket is
energised.
Replace with an original spare part.
If the problem persists, refer to the battery/
battery charger manual.
EN - 12