Setting Time, Date And Units - Crowcon Gas-Tec Manuel De L'utilisateur

Set-up Gas-Tec
Go into the DISPLAY menu to change the length of time the backlight stays
on, the screen contrast, or the language that the LCD display strings will
be shown in .

5.2 Setting time, date and units

Register when the survey is taking place . Ensure the log entry timestamp is correct by using the Time and
Date menu . Choose to display these in a number of different ways .
Similarly, there are options for the units to be used when the unit displays pressure and for the unit of
speed in the log entry .
Press 'BACK' to return to the Main Menu after storing appropriate settings .
The option to restore default values for each of the above will be offered
after these settings are altered . The default values are listed in Section IV .
30