Function Overview - Crowcon Gas-Tec Manuel De L'utilisateur

Gas-Tec
IV Function overview
This section provides an overview of what can be viewed and changed on the Gas-Tec and where to find
further information on how to control the instrument .
Start menu (see Chapter III)
Property
Sound volume
Range
FID range
Set-up menu (see Chapter V)
Property
Contrast
Sound volume
Range
Date
Date format
Time
Backlight timeout
Pressure units
Speed
Admin menu (see Chapter VII)
IMPORTANT NOTE: Accepting the option RESET DEFAULTS on this menu may remove calibration and
other settings . DO NOT do this unless absolutely sure
Property
PIN number
Service Date
Service Lock
Error Override
Default
25
Graphical
1000 ppm
Default
25
25
Graphical
01/01/09
DD/MM/YY
00:00:00
30s
psi
mph (miles per hour)
Default
1234
06
No
No

Function overview

Other options
5 - 50
Analogue or Graphical and Analogue
100 ppm
10000 ppm
Other options
5 - 50
5 - 50
Analogue or Graphical and Analogue
DD/MM/YYYY
MM/DD/YY
MM/DD/YYYY
1 min
3 min
Disable
bar
km/h (kilometres per hour)
m/s (metres per second)
Kts (knots)
Other options
User choice (which should be made
and used only by senior engineer)
This figure is the number of months
from the time and date entered at
set-up when the unit will go into
'service due' . If the Service Lock
is on, the unit will stop working . If
the Service Lock is off, the spanner
will show on the LCD display . The
number can be changed from 6 to
any number between 1 and 12 .
Yes
Yes
27