Start Up - Crowcon Gas-Tec Manuel De L'utilisateur

Gas-Tec
Attach the shoulder strap .
Attach both ends of the strap to the metal rods at either end of the Gas-Tec .
Using headphones:
Plug the headphones into the headphone jack at the base of the Gas-Tec . This will silence external
alarms and notifications of gas detection, leaving only the user to hear the increasing tones .

3.2 Start Up

When the hydrogen cylinder and the probe are
properly attached, the Gas-Tec can be switched
on .
1 . Press the ON/OFF button .
The LCD display will run a self test and then
be ready for use .
2 . Press START .
3 . The LCD display will show the message 'Turn on the gas
supply' (if the cylinder is not already turned on) .
4 . To open up the gas supply, turn the gas cylinder ON/OFF
valve on the end of the hydrogen bottle anticlockwise . Turn
until there is no more resistance . The pump will start as soon
as the Gas-Tec detects the flow of hydrogen .
N.B.) If the Gas pressure exceeds 1800 psi, a warning
message will appear on the display and the gas cylinder
valve MUST BE CLOSED IMMEDIATELY.
5 . Providing the gas supply is adequate, the pump will start .
Operation
23