Notes On This Manual; Safety - Kessel GTF 500 Notice D'utilisation D'origine

1.

Notes on this manual

The following conventions make it easier to navigate the manual:
Symbol
[1]
(5)
➊➋➌➍➎➏➐➑➒➓
1 Check whether manual
control has been activated.
▶ Press OK.
✓ System is ready for
operation.
Chap. "2. Safety"
➲
||Define maintenance
interval|
Bold type
Italics
L
016-084_02
Explanation
See Figure 1
Position number 5 from the adjacent figure
Action step in figure
Prerequisite for action
Action step
Result of action
Cross-reference to Chapter 2
Screen text
Particularly important or safety-relevant
information
Variant or additional information (e. g. only
applies for ATEX variant)
Technical information or instructions
which must be paid particular attention.
Installation and operating manual
2.

Safety

The following symbols are used:
Icon
Observe the instructions for use
WEEE icon, product governed by RoHS Guideline
Warns of a hazard for persons. Ignoring this warning can lead
WARNING
Warns of a hazard for persons and material. Ignoring this
warning can lead to serious injuries and material damage.
CAUTION
Meaning
Isolate device!
CE marking
Warning, electricity
Ground before use
to serious injuries or death.
13