Controls And Features; Controls; Implement Holders; For Your Safety - Monogram ZV36SSJSS Manuel Du Propriétaire

1. Warming lamps ON/OFF switch

Controls

2. Light control
3. Fan control
Implement holder rods are located on each
Implement
side of the hood.
Holders
Use these rods to hang and display cooking
utensils such as whisks, spoons, forks or any
non-flammable decorative items. Frequently
used small pots and pans can also hang from
these rods.
DO NOT hang flammable items from these
implement rods.
DO NOT hang items weighing more than 10
pounds on either side, or 20 pounds total
weight.
Before servicing or cleaning unit, switch power
For Your
off at service panel and lock the service
Safety
disconnecting means to prevent power from
being switched on accidentally. When the
service disconnecting means cannot be
locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
49-80775-2
The warming lamps are controlled by their
own rocker switch. Press the rocker switch
for the warming lamps to begin heating.
Turn the light control from OFF to HI for the
brightest light while cooking.
Turn the fan control speed from OFF to HI
as needed.
Continuous use of the fan system while
cooking helps keep the kitchen comfortable
and less humid. It also reduces cooking
odors and soiling moisture that create a
frequent need for cleaning.
NOTE: When the fan is operating on the
lowest setting, it will be very quiet. Always
make sure that the fan is turned OFF when
you are finished in the kitchen.
WARNING

Controls and Features

Professional Vent Hood
Appearance will vary.
2
Appearance will vary.
1
3
5