Philips Respironics SimplyGo Manuel De L'utilisateur page 34

Visual, Audio
Description
Indicators
Continuous Flow Mode
Indicator
This symbol appears when
the device is operating in
Continuous Flow Mode
Flow Control Setting
The large number on the
right side of the screen
shows the oxygen ow
setting (In this example,
it is 2) This number
can range from 1 to 6 in
increments of one-half for
1 short beep
Pulse and Sleep modes
and from 5 to 2 for
Continuous Flow mode
AC Power Required
Warning
The screen appears
when your device is
A sequence
in Sleep Mode and AC
of alternating
power has not been
short and
connected or has become
long beeps
disconnected
that repeats
three times
SimplyGo User Manual
What To Do
If this is your Mode
setting, no action is
needed
If this is not your
Mode setting, press
the Mode button until
your proper Mode
setting appears
If this is your ow
setting, no action is
needed
If this is not your ow
setting, press the +
button to increase this
number or press the –
button to decrease this
number
Connect your device to
an AC power source
31