6.2
door level adjustment
WARNING
!
•
Do not use substitute materials.
•
Glass may be hot; do not touch glass until cooled.
Door adjustment may be
necessary if door is not level.
note:
The safety screen and glass door are equipped with the same adjustment mechanism. If necessary, follow
the same "door level adjustment" procedure for the safety screen and/or glass door.
note:
Door adjustment is strictly trial and error; you may need to perform this adjustment a few times until the
desired door angle is attained.
1
Lower the door and shim the corner that is
resting on the hearth approximately half the gap of
the opposing side.
operation and adjustments
2
Loosen top and bottom screws on the left side of
door frame. Pull the high side down to touch the
hearth.
EN
27
W415-1676 / D / 03.02.20