Technical Characteristics Of Product; Description Of Connections - Roger Technology B70/2DC Instructions Et Consignes Pour L'installateur

3

Technical characteristics of product

FUSES
GATE
4

Description of connections

Figure 1 shows connection diagrams.
TRANSFORMER
220÷230
V A
V A
+
-COM
350 W
F1 = 15A (ATO257) motor power circuit protection.
F2 = 4A (ATO257) accessories power supply protection
F3 = T1A (5x20 mm)
2
24 Vac ,
sinusoidal drive brushless
40 W
110 W
25 W (24 Vdc)
50%
3 W (24 Vdc)
15 W (12 Vdc)
10 W (24 Vdc)
IP54
dimensions in mm 330x230x115 Weight: 3,9 kg
Measure the voltage on the primary mains power connection with a tester.
For the Brushless automation system to function correctly, the mains power
voltage must be at least 230Vac (115 Vac) ± 10%.
If the voltage measured is not as indicated above or is unstable, the automation
system may not work correctly.
N L
B70/2DC/BOX B70/2DC115/BOX
potential free contact)
39