Technical Characteristics Of Product - Roger Technology B70/2ML Instructions Et Consignes Pour L'installateur

4

Technical characteristics of product

MAINS POWER VOLTAGE
MAXIMUM MAINS POWER ABSORPTION
INRUSH POWER
FUSES
CONNECTABLE MOTORS
MOTOR POWER SUPPLY
MOTOR TYPE
MOTOR CONTROL TYPE
RATED MOTOR POWER
MAXIMUM MOTOR POWER
MAXIMUM POWER, FLASHING LIGHT
FLASHING LIGHT DUTY CYCLE
MAXIMUM POWER
GATE OPEN LIGHT POWER
ELECTRIC LOCK POWER
MAXIMUM ACCESSORY CURRENT
ABSORPTION
OPERATING TEMPERATURE
DEGREE OF PROTECTION
PRODUCT DIMENSION
(*) The electric lock output provides a voltage of 24Vdc nominal (max 30Vdc) modulated to 50% (50% ON, 50% OFF).
The device to be connected must therefore be able to withstand a maximum voltage of 30Vdc.
The total of the absorption values of all the accessories connected must not exceed the maximum power
values shown in the table. The values are guaranteed with original ROGER TECHNOLOGY accessories ONLY.
All the connections are protected by fuses (refer to the table). The courtesy light requires an external fuse.
B70/2ML
230 Vac ± 10% 50 Hz
150 W
350 W
F1 = F3.15A (5x20 mm) accessories power supply protection
F2 = F15A (5x20 mm) engines power circuit protection
F3 = T1A (5x20 mm) Primary transformer protection
2
24 Vac
sinusoidal drive brushless (ROGER BRUSHLESS)
40 W
110 W
25 W (24 Vdc)
50%
100 W 230 V
3 W 24 V
15 W 12 V (medium voltage) (*)
10 W 24 V (400 mA)
IP54
dimensions in mm 112x175
B70/2ML/115
(potential free contact)
53