SOLIS CAFFESPRESSO PRO Mode D'emploi page 91

Type 117
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

C LE A n inG t h E D Ri P t RA y
Before cleaning the drip tray, the appliance should be switched off and
unplugged.
The drip tray should be removed, emptied and cleaned at regular intervals, particu-
larly when the drip tray full indicator is showing EMPTY ME!
Remove grill and EMPTY ME indicator from the drip tray. The yellow EMPTY ME
indicator can be removed by pulling upwards to release the side latches. Wash the
drip tray with warm soapy water. Do not use abrasive cleaners, pads or cloth. Rinse
the drip tray and dry thoroughly.
Reattach the EMPTY ME indicator and reinsert the grill in the drip tray.
C LE A n inG t h E S t O R A G E tR A y
The storage tray, located behind the drip tray, can also be removed after the drip tray
is removed. Remove the storage tray and wash it with warm soapy water. Do not
use abrasive cleaners, pads or cloths. Dry the storage tray thoroughly, then reinstall.
WARNING:
Take care during cleaning that power cord, power plug or appliance is not
immersed in water or any other liquid.
The water tank should never be removed or completely emptied during
decalcifying.
StO R i n G y O u R S O L i S C A FF E S P RE SS O P RO
Before storing, press the POWER-button to turn off, turn the Steam/Hot Water dial
to Standby-position. Unplug the power plug and insert all accessories into position.
Store the cooled, cleaned and dried machine in an upright position, preferably use
the original packaging. Do not place anything on top of the machine.
91

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bes840

Table des Matières