SOLIS CAFFESPRESSO PRO Mode D'emploi page 78

in D i V iD u A L Ly P RO G RA mmi n G
A S i nG LE ( S imP L E ) E S P RE S S O
With your SOLIS Caffespresso Pro, you can adjust the quantity for a single
(simple) espresso yourself and program the appliance for future use – setting
your personal coffee preferences. Place a cup under the group head and
proceed as follows:
1. To change the pre-programming, press the PROGRAM-button (O) once.
The machine will beep once and the PROGRAM-button will begin to flash.
This indicates the machine is in programming mode.
2. Press 1 Cup-button
the desired volume of espresso has been extracted into the cup, press the
1 Cup-button
1 Cup volume has been set.
in D i V iD u A L Ly P RO G RA mmi n G
A D O ub LE E S P RE S S O
With your SOLIS Caffespresso Pro, you can adjust the quantity for a double
espresso yourself and program the appliance for future use – setting your
personal coffee preferences. Place a cup under the group head and proceed
as follows:
1. To change the pre-programming, press the PROGRAM-button (O) once. The
machine will beep once and the PROGRAM-button will begin to flash. This
indicates the machine is in programming mode.
2. Press 2 Cup-button
Once desired volume of espresso has been extracted in the cup, press the
2 Cup-button
2 Cup volume has been set.
RE S E t tinG D E FA u L t V O L umE S
To reset the machine to the default 1 Cup or 2 Cup shot volumes, press and
hold the PROGRAM-button (O) until the machine beeps three times. Release
the PROGRAM-button – the machine will return to its original default set-
ting.
NOTE: Default setting means:
1 cup espresso shot volume is approximately 30 ml, 2 cups espresso shot volume is
approximately 60 ml.
78
to start espresso extraction from the portafilter. Once
again. The machine will beep twice to indicate the new
to start espresso extraction from the portafilter.
again. The machine will beep twice to indicate the new