Exploded Drawing; Ordering Spare Parts; Packaging, Transport, Storage - Burkert 5282 Manuel D'utilisation

9. spare parTs
Caution!
Risk of injury and/or damage by the use of incorrect
parts!
Incorrect accessories and unsuitable spare parts may
cause injuries and damage the device and the sur-
rounding area.
• Use original accessories and original spare parts from
Bürkert only.
9.1.

Ordering spare parts

Replacement part sets
Order the spare-part set SET 3 or the pilot control with
solenoid coil (complete) by quoting the identification number
of the device.
• See replacement part sets
• The identification number of the device can be found
on the rating plate. See also chapter 6.4.Rating plate
description.
10. packaging, TranspOrT,
sTOrage
note!
Transport damages!
Inadequately protected equipment may be damaged
during transport.
• During transportation protect the device against wet
and dirt in shock-resistant packaging.
• Avoid exceeding or dropping below the allowable
storage temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature: -40 °C ... +80 °C

9.2.Exploded drawing.

english
29
english
31
9.2. exploded drawing
english
30
11. dispOsal
→
Dispose of the device and packaging in an environmen-
tally friendly manner.
note!
Damage to the environment caused by device com-
ponents contaminated with media.
• Observe applicable regulations on disposal and the
environment.
Note:
Observe national waste disposal regulations.
english
32
Type 5282
Pilot valve
SET 3