Rating Plate - Burkert 5282 Manuel D'utilisation

Permitted media depending on seal material:
Seal material
FKM Per-solutions, hot oils without addi-
tives, diesel and heating oil without
additives, detergent solution
EPDM Oil and grease-free liquids, cold and
hot water
NBR Cold and warm water
Operating duration
Unless otherwise indicated on the rating plate, the solenoid
system is suitable for continuous operation.
Important information for functional reliability during
continuous operation!
If standstill for a long period at least 1-2 activations
per day are recommended.
Service life
High switching frequency and high pressures reduce the
service life.
6.4.1.

rating plate

Example:
Orifice
Operating
prinziple
Type
5282 A 25 EPDM MS
G1 1/4 P N 0,2 - 16 bar
230V
00134469
Id. Number
Manufacturer-Code
Voltage, frequency, power
consumption
Connection thread, nominal
pressure
Permitted media
english
13
Seal material
Housing material
50-60Hz 8W
W17 LU
english
15
6.3. conformity
CE - mark conforms to EMC Directive 2004/108/EEC, Low
Voltage Directive 2006/95/EC only if cables, plugs and
sockets connected correctly.
6.4. rating plate description
Fig. 1: Location of the rating plate
english
14
7. insTallaTiOn
7.1. safety instructions
Danger!
Risk of injury from high pressure in the equipment!
• Before loosening the pipes and valves, turn off the
pressure and vent the pipes.
Risk of injury due to electrical shock!
• Before reaching into the device or the equipment,
switch off the power supply and secure to prevent
reactivation!
• Observe applicable accident prevention and safety
regulations for electrical equipment!
Warning!
Risk of injury from improper installation!
• Installation may be carried out by authorized techni-
cians only and with the appropriate tools!
Risk of injury from unintentional activation of the
system and an uncontrolled restart!
• Secure system from unintentional activation.
• Following assembly, ensure a controlled restart.
english
16
Type 5282
Rating plate